2015-09-28 16:26:39

As one of the two essential elements of concrete mixing station, the concrete mixer plant has a very important role. So, what are the conditions for the use of concrete mixer?

First of all, the concrete mixer should be set in a flat place, so that the tire is in the left position, so as to avoid loosening at the start. The best performed for test run before mixing, ready to work. Need to pay attention to is that during the test run should test the suitability of mixing cylinder speed, under normal circumstances, the no-load speed than after loading slightly faster turn 2-3, such as the difference between the more and proportion adjusting wheel and the driving wheel.

Secondly, in the concrete mixing plant  to carefully check the various parts, see the transmission clutch and brake is flexible and reliable, wire rope is not damaged, the track pulley is good, there is no obstacle and all parts of the lubrication. Confirm no problem and then boot.

Third, if the boot process, if you find electrical or mechanical failure, should discharge more than expected, and so on after the failure of the boot operation. Of course, in the use of the regular inspection, to prevent the occurrence of safety accidents.

Finally, after the use of concrete plant manufacturer , pull off power, lock switch control box, remember to clean up, clean the site, so that the machinery to keep clean.