English Russian Chinese Spanish Arabic MengGuYu

batch plant reasons for the trip of the boring machine

2015-12-28 11:25:55

Concrete mixer is the cement, sand and gravel aggregate and water mixture and mix to make concrete mixture of machinery. Mainly consists of mixing drum, feeding and unloading mechanism, water supply system, prime mover, transmission mechanism, frame and supporting device, etc.. small concrete mixing plant equipment  main equipment concrete mixer in the normal process of mixing, mixing the host machine appears to trip phenomenon. Cause and treatment method of the concrete mixing station:

1. Feed too much, cause mixer load is too large: check the said material system is normal; the mixer if there is residual in the hanging wall of the material and the second feeding phenomenon.

The gap between the blade and the lining board is too large, and the mixing process increases the resistance: check whether the gap between the blade and the lining of the skip type concrete mixing plant is in 3~8mm; whether the thickness of the lining plate is greater than 2-3mm, as otherwise.

The drive belt is too loose, system transmission efficiency is low: check that the drive belt tightness is more than 20mm, is adjusted or replaced.

The mini concrete batching plant  mixing host cover safety maintenance switch is vibration loose and cause downtime: check the host cover safety switch is loose and processing.

The gearbox and shaft damage: Inspection and replacement of chrysanthemum.